DHB60 drum mix plant

Hot Mix Plant

Hot mix plant can produce quality asphalt mixture for all kinds of construction project, such as, road, expressway road, highway, airport, wharf, etc. Because all of raw materials will be heated and dried. So this plant can produce high-quality asphalt.

There are two types of plants we sell: batch type and drum type. Let’s have a general understanding about them.

80t batch type asphalt plant
ALQ80 batch type asphalt plant

asphalt mixture
asphalt plant installation
drying drum of asphalt plant
PLC control

Compositions of batch type hot mix plant-ALQ series

compositions of batch type asphalt plant
compositions of batch type asphalt plant

1. cold aggregate batching system; 2. drying and heating; 3. lifting system; 4. screening machine; 5. weighing part; 6. mixing machine; 7. dust collector; 8. filler batching; 9. asphalt supply; 10. pneumatic system; 11. electronic control.

Working process of batch type

Aggregate: all kinds of rubble of various bone diameters. After batching and delivery, they will be sent to drying and heating system, meanwhile, dust collector is working to ensure the whole working environment and quality of finished products. Then lift the hot aggregate to screens system, weighing, in the end, sent to mixing machine.

Filler: there are three fillers in general: mountain flour, cement and additives. Through dust collecting and weighing, sent to mixing machine.

Asphalt: asphalt will be heated in the asphalt tank, through measuring, discharged to mixing machine.

When these three raw materials enter mixing machine, will start to mix and blend them evenly, then discharged into finished product bin.

LB500 asphalt batch plant
ALQ40 asphalt batch plant

LB1500 batch asphalt mixing plant
ALQ120 batch asphalt mixing plant


Specifications Of ALQ series

Type ALQ40 ALQ60 ALQ80 ALQ100 ALQ120 ALQ160 ALQ200 ALQ240 ALQ320
Production capacity(t/h) 40 60 80 100 120 160 200 240 320
Mixer(kg) 600 800 1200 1300 1700 2300 2800 3300 4500
Mixing cycle(s) 45 45 45 45 45 45 45 45 45
Dry capacity(t/h) 50 80 100 120 150 200 260 300 400
Fuel Diesel, heavy oil, natural gas, liquefied gas, pulverized coal
Dust filter Gravity dust filter+ Cyclone dust filter + Bag dust filter/ Water dust filter
Bag dust Filter area(m2) 260 380 420 420 520 620 820 1050 1224
Fan motor (kw) 37 45 55 55 75 110 132 150 185
Vibrating layer 4 4 4 4 4 5 5 5 6
Asphalt tank(t) Option, 10-40t or Depend on request
Asphalt heating system Heat conducting oil furnace or Direct heat asphalt tank

Advantages of batch type

1. Can ensure the proportion of cold aggregate farthest, accurate weighing and proportioning.

2. Aggregate grading and aggregate ratio are adjustable, then produce high-quality asphalt mixture, suitable for all kinds of project.

3. This hot batch asphalt mixing plant for sale is ideal choice for highway above high grade.

Drum type hot mix asphalt plants

components of drum mix plant
components of drum mix plant

1. cold aggregate system; 2. asphalt supply system; 3. heating and drying; 4. finished product bin; 5. dust removal; 6. control system.

Working process of hot asphalt mixing plant–drum type-ALT series

Cold aggregate will be sent to drying drum through belt conveyor, after they are weighed and proportioned. after heating and drying, weighed asphalt and filler will enter drum and blend cocurrently. Finished product will be sent to finished product storage bin through lifting machine, then discharged into transport truck.

Stationary drum type

ALT40 asphalt drum plant
ALT40 asphalt drum plant


ALT60 drum mix plant
ALT60 drum mix plant


Specifications of ALT series

Type ALT20 ALT40 ALT60 ALT80
Production capacity(t/h) 20 40 60 80
Total Power(kw) 50 75 123 140
Fuel Consumption(kg/t) 5.5-7.0kg/t(Fuel)
Effect of De-dusting(mg/Nm3) Dust discharge concentration≤50(Bag dust)
Volume of Cold Aggregate Storage(m3) 4.0m3×4
Unloading Height(m) 3
Control Mode Manually, Semi-Auto/ Auto

Mobile batch hot mix type-ALYQ series

This type is also equipped with compulsory concrete mixer, can produce asphalt mixture forcibly. But it is conveneint to move from site to site. So it is very portable. Check some pictures below.

ALYQ40 mobile asphalt batch plant
ALYQ40 mobile asphalt batch plant


ALYQ60 mobile asphalt batch plant
ALYQ60 mobile asphalt batch plant


Specifications of ALYQ series

Type ALYQ40 ALYQ60 ALYQ80 ALYQ100 ALYQ120 ALYQ160
Production capacity(t/h) 40 60 80 100 120 160
Mixer(kg) 600 800 1200 1300 1700 2200
Mixing cycles(s) 45 45 45 45 45 45
Dry Capacity(t/h) 50 80 100 120 150 200
Fuel Diesel, heavy oil, natural gas, liquefied gas, pulverized coal
Dust Filter Gravity dust filter+ Cyclone dust filter + Bag dust filter/ Water dust filter
Bag dust Filter area(m2) 260 370 420 480 510 620
Vibrating layer 4 4 4 4 4 5
Asphalt tank(t) Option, 10-40t or Depend on request
Asphalt heating Heat conducting oil furnace or Direct heat asphalt tank

Mobile drum hot mix asphalt plant-ALYJ series

In addition stationary type asphalt equipment, we also supply mobile hot mix asphalt plant from 10t to 80t. Any interest, you can mailto me: sales@aimixgroup.pk. We must give you best asphalt hot mix plant price.

ALYJ-60 mobile double drum mix plant
ALYJ-60 mobile double drum mix plant
cold aggregate batching machine
cold aggregate batching machine
control panel
control panel
control room
control room
finished product bin
finished product bin
asphalt supply system
asphalt supply system
burner
burner

Specifications of ALYJ series

Model ALYJ-10 ALYJ-20 ALYJ-40 ALYJ-60 ALYJ-80
Production capacity(t/h) 10 20 40 60 80
Total Power(kw) 58 77 152 188 244
Aggregate Batcher(m3) 3m3*3 3m3*3 5m3*3 5m3*3 5m3*4
Finished Asphalt Storage Bin(t) 2 5 9 9 20
Asphalt Temperature 120°C-180°C (adjustable)
Fuel Consumption(kg/t) Fuel Oil: 5-7.5kg/t ; Fuel Coal: 13-15kg/t
Optional Components Water dust collector, Bag house dust collector, Control room, Bitumen heating tank

Advantages of hot asphalt plant

Continuous drum type hot mix asphalt plant has characteristics of simple working process, simple equipment, less land occupation, can produce asphalt mixture continuously, short waiting time.

Up to now, there are many asphalt manufacturers, if you want to get a quality and reputable manufacturer, you need to do a lot of research about this field. And compare them from aspects of history, technicians, engineer, salesman, workshop, cases, after-sales service.

Maybe the cost is little high, but if you want to get high returns, investing a hot mix plant for sale will be your wise decision. Now you have known what is asphalt hot mixing plant. So if you are freshman for hot mix bitumen plant, you can invest a mini hot mix asphalt plant, if you make more money and was satisfied with our hot mix mobile plant, you can invest a big capacity machine. In a word, any doubts, contact us now! We will give you best site-planning!

Please feel free to give your inquiry in the form below. We will reply in 24 hours.